Why Outdoor Masonry Cracks in Winter, and How to Prevent It
Masonry cracks in winter for one main reason: water gets in and freezes. Outdoor masonry, such as steps, pillars, garden walls and outdoor fireplaces, is built to last generations, but in Ontario freeze-thaw is what works against it.
Understanding how that damage happens makes it much easier to prevent, and to spot early when it starts.
How freeze-thaw damages masonry
Brick, stone, block and mortar all absorb some water. When that water freezes, it expands by roughly 9%, pushing against the material from inside. Repeat that dozens of times a winter and the surface starts to break down. Salt makes it worse: it draws more moisture into the masonry and adds its own crystal pressure as it dries.
Caps, copings and drips keep water off the vulnerable top of a wall.
Common signs of damage
•Spalling: the face of a brick or stone flakes or pops off.
•Mortar erosion: joints become sandy, recessed or crumble when scratched.
•Cracks: stepped cracks along mortar joints, or cracks through units.
•Efflorescence: white, powdery deposits left when water moves salts to the surface.
•Loose caps or treads: water got under them and froze.
Why some masonry fails and some doesn't
Water management
The biggest difference is how well water is kept out and let out. Wall caps and step treads should overhang and slope so water drips clear. Weep holes and drainage behind retaining or veneer walls let water escape instead of building up.
The right materials
Exterior units need to be rated for freeze-thaw exposure. Interior brick or soft stone used outdoors often fails within a few winters.
The right mortar
Mortar should be suited to the units and exposure. Mortar that is much harder than the brick can force movement into the brick itself, causing spalling. That matters most when repointing older masonry.
A solid foundation
Steps, pillars and walls need footings or bases that don't heave with frost. When the base moves, cracks follow.
Units rated for freeze-thaw exposure are the starting point.
How to protect what you have
✓Keep downspouts and sprinklers from soaking walls and steps.
✓Clear snow off steps and caps rather than letting it melt into them all winter.
✓Use salt sparingly on masonry steps; sweep up excess when the ice is gone.
✓Repoint failing mortar joints before water gets deeper into the wall.
✓Reset loose caps and treads promptly, before the next freeze.
✓Consider a breathable water repellent made for masonry, which reduces absorption while letting moisture escape.
Dry-laid walls have no mortar to fail, but still need a solid base and drainage.
Repair or rebuild?
Isolated spalled units and worn joints can usually be repaired: units replaced and joints repointed with compatible mortar. If a structure is leaning, cracking through, or moving with every winter, the problem is usually the base, and a rebuild with proper footings and drainage is the lasting fix.
Common questions
Is efflorescence a sign of damage?
Not by itself. It shows water is moving through the masonry and carrying salts out. It is worth finding where that water is coming from, because the same moisture can cause freeze-thaw damage.
Should outdoor masonry be sealed?
Only with a breathable water repellent made for masonry. Coatings that trap moisture can make spalling worse. Fixing water sources such as downspouts and missing caps comes first.
When is the best time for masonry repairs?
Mortar needs moderate temperatures to cure properly, so repairs are usually done from spring to fall. Work done close to freezing needs special precautions.
Need masonry repaired or built right?
Our masonry team builds and repairs steps, pillars, walls and outdoor fireplaces with materials and details suited to Ontario winters. For taller walls that hold back soil, see retaining walls. Book a free estimate.