Choosing a fence for Toronto winters is mostly about what happens below and at ground level. Most fences don't fail because of the boards; they fail because the posts lean after a few winters, the gate sags, or salt spray eats the bottom rail.
Here is what to think about beyond the look of the fence.
Why fences lean: frost heave
When wet soil freezes, it expands and can lift anything anchored in it. Posts set too shallow get pushed up a little each winter and rarely settle back evenly. The fix is simple but easy to skip: set posts deep enough, below the depth where the ground freezes, and in a hole that drains rather than holding water around the post.
Pool enclosures have their own rules for height and gates.
Choosing a material for the job
Wood (cedar or pressure-treated)
Classic for privacy fences and easy to customize. Wood moves with moisture and needs a stain or sealer every few years. Keep boards a little above the soil so they aren't sitting in wet ground or snowbanks.
Aluminum
Light, rust-resistant and low-maintenance. It suits pool enclosures and front yards where you want definition without blocking the view. It doesn't give privacy on its own.
Vinyl
No painting or staining, and it handles moisture well. Look for good-quality panels with internal reinforcement, because cheap vinyl can become brittle in deep cold.
Cedar, aluminum and vinyl each handle winter differently.
Snow, wind and salt
•Snow load: solid privacy fences catch drifting snow. If you pile snow against a fence when shovelling, the weight and moisture shorten its life. Plan where snow will go.
•Wind: a tall solid fence acts like a sail. Slightly spaced boards or a lattice top let some wind through and reduce the load on posts.
•Road salt: fences along driveways and streets get salt spray every winter. Aluminum and vinyl handle it best; wood should be kept clear of the ground and resealed more often.
Gates are the weak point
A gate is a lever hanging off one post, opened hundreds of times a year. Ask for a heavier gate post than the line posts, a rigid frame with diagonal bracing, and heavy-duty hinges. Leave enough clearance at the bottom for snow, or you won't be able to open it in February.
A braced frame and a stout gate post keep gates from sagging.
Rules to check before you build
Municipalities set maximum fence heights, which usually differ between front and back yards, and have stricter rules for pool enclosures, including height and self-closing, self-latching gates. In Toronto these are in the Municipal Code's fence chapter. It is also worth confirming your property line with a survey before building on it, and talking to neighbours about shared fences.
Common questions
How deep should fence posts be in Toronto?
Posts should go deep enough to resist frost heave and wind, and many installers set them to or near the local frost depth. The right depth also depends on fence height, soil and post spacing, so it should be part of the quote.
Concrete or gravel around fence posts?
Both are used. Concrete gives a stiff set, but it should be shaped to shed water away from the post. Compacted gravel drains well and reduces water sitting around wood posts. Your installer should explain which they use and why.
When is the best time to install a fence?
Any time the ground isn't frozen. Spring and fall are popular. If a fence is for a pool, it needs to be complete before the pool is filled.